Questions and answers — Q&A¶
Last update · 7 min read
Collect questions from your audience, moderate them while the session runs, and keep one question on the stage screen at a time.
Before you start¶
Q&A is for people who can edit the event: its creator, its moderators and an Owner, Admin or Manager of the organizing company. Anyone else, such as a host, sees no access next to Q&A in the panel.
Every agenda session gets its own Q&A. An event with no sessions in its agenda has no Q&A to open.
You can save the settings while the event is still a DRAFT. You can open a Q&A only on a PUBLISHED event, and only while the session is active. RU4M refuses the change otherwise and the session stays closed.
No package restricts Q&A.
Where Q&A is¶
- Open your events list.
- Select the event.
- Select Q&A under Engagement in the event panel.
The page opens on Rooms. One row is one agenda session, with its room and its time. The badge on that row reads the state of its Q&A:
- Not configured — nobody saved the settings yet.
- Disabled — saved, but nobody opened it.
- Open, Paused or Closed — the running states.
- Unavailable — RU4M could not load the Q&A for that session.
Select a row to open that session. The panel beside it carries three sub-tabs: Settings, QR code and Moderator console. The panel opens on Moderator console.
An event whose agenda has no sessions reads The agenda has no sessions yet. Add the sessions first, then come back.
Setting up and opening¶
Saving the settings¶
Select Settings. Every control starts switched off.
The form holds six controls:
- Anonymous questions — attendees ask without showing their name.
- Question length (characters) — 500 by default, and it accepts 50 to 2000.
- Questions per attendee — 3 by default, from 1 to 20, or No limit.
- Shared audience view allowed — the moderator publishes questions to the shared view.
- Stage screen enabled — the moderator picks the question on the stage screen.
- Voting on questions — attendees vote on published questions.
The panel states the rule that governs all of them: Defaults stay off. The audience view and the stage screen stay off until the moderator or the organizer turns them on.
The organizer alone changes Anonymous questions, Question length (characters), Questions per attendee, Shared audience view allowed and Stage screen enabled. A moderator changes Voting on questions and nothing else on this form.
Select Save. RU4M answers Settings saved.
Opening the Q&A¶
Once you save the settings, the session reads Disabled and an Open Q&A button appears above it.
Select Open Q&A. The dialog asks who is watching the questions.
Tick A responsible person is watching the questions in this room. The button stays disabled until you tick it.
Select Open Q&A in the dialog. The session reads Open and attendees can send questions.
The same button follows the state later on: Pause and Close while the session is open, Resume and Close while it is paused, and Reopen once it is closed.
Printing the join QR code¶
Select QR code to get one permanent code for that session. Select Download PNG to save it, or Copy link to send the join address. The code stays the same for the whole session, so print it once and reuse it.
Moderating questions¶
Reading the console¶
Select Moderator console. Questions arrive here within seconds, once the AI check has run. A question still waiting on that check stays hidden.
Four dropdowns sit above the list. None of them carries a visible name, so read them from the left:
- The first reads Active questions. It holds active questions, or one state.
- The second reads All outcomes. It holds answered, dismissed or closed without answer.
- The third reads All sources. It holds attendee or prepared questions.
- The fourth reads All checks. It holds Pending, Blocked or Errors.
A New: counter tells you how many questions arrived since you last looked. Select Mark as seen to clear it.
An empty list reads No questions match these filters.
Preparing a question¶
Select Prepare a question, write the question and select Add question.
The panel explains what a prepared question is: it skips the AI check, and it never shows as an attendee question. RU4M marks it Prepared. It cannot be published to the audience view and cannot go on the stage screen.
Acting on a question¶
Every question carries History, which lists who changed it and when. The other buttons depend on where the question stands:
- Inbox and Reopened — Select, Mark answered, Close without answer, Dismiss.
- Selected — Mark answered, Close without answer, Dismiss.
- Closed — Reopen.
Mark answered and Close without answer both close the question. The first records an answer, the second records that none came.
An attendee question that passed the AI check also carries Publish; a published one carries Unpublish and the badge Published.
Questions that fail the AI check¶
RU4M checks attendee questions before they reach you. A question that fails carries a scan badge reading Blocked or Errors, and the moderation buttons stay unavailable. It does not appear under the default Active questions filter, so switch the All checks dropdown to Blocked or Errors to find it.
Select Override AI check on that question. Write why the question is fine to publish and select Save correction. The box needs between 1 and 500 characters, and the button stays disabled until the box has them.
The question returns to the list as Inbox, and the ordinary moderation buttons come back.
The AI check health card counts what is Pending, Blocked and Errors for that session, and names the oldest pending question. Select Retry to queue a failed check again.
Audience and stage display¶
The shared audience view¶
Turn on Shared audience view allowed in Settings first. Then select Live audience view in the console to show the published questions on that view right away. Turn the switch off to hide them again.
Only a published question reaches the shared view, and only while Shared audience view allowed is on. Publish a question with Publish, as described in Acting on a question.
The stage screen¶
Turn on Stage screen enabled in Settings before you use this. The Stage screen card in the console names the question standing on the screen, or reads No question on the stage screen. Select Remove to clear it.
On a published attendee question, Show on stage screen sends it there and Remove from stage screen takes it back. The card shows one question at a time.
The stage link¶
The stage link belongs to the organizer, and it sits at the bottom of the Settings sub-tab.
Select Generate link. RU4M shows the address once and never again. Copy it with Copy link and keep it secret.
Open that address on the computer at the stage to show the published questions on the projector.
Select Generate new link to replace it. The current link stops working at once, and the stage screen needs the new address. Select Revoke link to switch the link off until you generate another one.
Closing and exporting¶
Closing the Q&A¶
Select Close above the session. RU4M stops taking new questions at once.
The questions you already have stay in the list and in History. Select Reopen to accept questions again, or Pause to stop them temporarily without closing.
Exporting the questions¶
The Question export card sits at the bottom of the Settings sub-tab. Select Download to save every question of that session as a CSV file.
The file opens in any spreadsheet. It starts with a count of the total, answered, dismissed, closed without answer and blocked questions, and then carries one row per question with its date, text, author, state and check result.
The badge above the button counts down the days until every question is deleted. RU4M keeps them 30 days after the event ends, and deletes them after that day has passed.
Troubleshooting¶
Q&A shows no access. You cannot edit this event. Ask its creator, its moderators or an Owner, Admin or Manager of the organizing company.
A row reads Not configured. Nobody saved the settings for that session. Open it, select Settings, then select Save.
A row reads Unavailable. RU4M could not load the Q&A for that session. Reload the page; if it stays, contact RU4M support.
The page reads The agenda has no sessions yet. The agenda is empty. Add the sessions to it first.
The Open Q&A button refuses the change. Q&A opens only on a PUBLISHED event, and only while the session is active. Publish the event and try again during the session.
The submit button in the dialog stays disabled. You have not ticked A responsible person is watching the questions in this room. RU4M requires that confirmation.
A question carries a scan badge but stays out of the list. A held question reads Blocked or Errors and stays out of the default Active questions filter. Switch the All checks dropdown to Blocked or Errors to find it, then select Override AI check and explain why the question is fine.
The Save correction button stays disabled. The reason is empty or longer than 500 characters.
The stage screen stays empty. Turn on Stage screen enabled in Settings, then send a published attendee question to it.
A stage link does not open. It was replaced or revoked. Select Generate new link and update the stage computer.
Related tasks¶
- Participants and attendance — who has joined your event.
- QR codes and event materials — codes participants scan.
- Team and roles — who moderates beside you.
- Event results — numbers about your audience.
- Speed meeting reservations — who booked each slot.